CModel

属性详细

Returns all attribute values.

Returns the errors for all attribute or a single attribute.

Returns an iterator for traversing the attributes in the model. This method is required by the interface IteratorAggregate.

Returns the attribute names that are safe to be massively assigned. A safe attribute is one that is associated with a validation rule in the current scenario.

Returns the scenario that this model is used in.

Scenario affects how validation is performed and which attributes can be massively assigned.

A validation rule will be performed when calling validate() if its 'on' option is not set or contains the current scenario value.

And an attribute can be massively assigned if it is associated with a validation rule for the current scenario. Note that an exception is the unsafe validator which marks the associated attributes as unsafe and not allowed to be massively assigned.

Returns all the validators declared in the model. This method differs from getValidators in that the latter would only return the validators applicable to the current scenario. Also, since this method return a CList object, you may manipulate it by inserting or removing validators (useful in behaviors). For example, $model->validatorList->add($newValidator). The change made to the CList object will persist and reflect in the result of the next call of getValidators.

Returns the validators applicable to the current scenario.

方法详细

public function addError($attribute,$error)
{
    $this->_errors[$attribute][]=$error;
}

Adds a new error to the specified attribute.

public function addErrors($errors)
{
    foreach($errors as $attribute=>$error)
    {
        if(is_array($error))
        {
            foreach($error as $e)
                $this->_errors[$attribute][]=$e;
        }
        else
            $this->_errors[$attribute][]=$error;
    }
}

Adds a list of errors.

protected function afterConstruct()
{
    if($this->hasEventHandler('onAfterConstruct'))
        $this->onAfterConstruct(new CEvent($this));
}

This method is invoked after a model instance is created by new operator. The default implementation raises the onAfterConstruct event. You may override this method to do postprocessing after model creation. Make sure you call the parent implementation so that the event is raised properly.

protected function afterValidate()
{
    $this->onAfterValidate(new CEvent($this));
}

This method is invoked after validation ends. The default implementation calls onAfterValidate to raise an event. You may override this method to do postprocessing after validation. Make sure the parent implementation is invoked so that the event can be raised.

public function attributeLabels()
{
    return array();
}

Returns the attribute labels. Attribute labels are mainly used in error messages of validation. By default an attribute label is generated using generateAttributeLabel. This method allows you to explicitly specify attribute labels.

Note, in order to inherit labels defined in the parent class, a child class needs to merge the parent labels with child labels using functions like array_merge().

abstract public function attributeNames();

返回模型属性名称的列表。

protected function beforeValidate()
{
    $event=new CModelEvent($this);
    $this->onBeforeValidate($event);
    return $event->isValid;
}

This method is invoked before validation starts. The default implementation calls onBeforeValidate to raise an event. You may override this method to do preliminary checks before validation. Make sure the parent implementation is invoked so that the event can be raised.

public function behaviors()
{
    return array();
}

Returns a list of behaviors that this model should behave as. The return value should be an array of behavior configurations indexed by behavior names. Each behavior configuration can be either a string specifying the behavior class or an array of the following structure:

'behaviorName'=>array(
    'class'=>'path.to.BehaviorClass',
    'property1'=>'value1',
    'property2'=>'value2',
)

public function clearErrors($attribute=null)
{
    if($attribute===null)
        $this->_errors=array();
    else
        unset($this->_errors[$attribute]);
}

Removes errors for all attributes or a single attribute.

public function createValidators()
{
    $validators=new CList;
    foreach($this->rules() as $rule)
    {
        if(isset($rule[0],$rule[1]))  // attributes, validator name
            $validators->add(CValidator::createValidator($rule[1],$this,$rule[0],array_slice($rule,2)));
        else
            throw new CException(Yii::t('yii','{class} has an invalid validation rule. The rule must specify attributes to be validated and the validator name.',
                array('{class}'=>get_class($this))));
    }
    return $validators;
}

Creates validator objects based on the specification in rules. This method is mainly used internally.

public function generateAttributeLabel($name)
{
    return ucwords(trim(strtolower(str_replace(array('-','_','.'),' ',preg_replace('/(?<![A-Z])[A-Z]/', ' \0', $name)))));
}

Generates a user friendly attribute label. This is done by replacing underscores or dashes with blanks and changing the first letter of each word to upper case. For example, 'department_name' or 'DepartmentName' becomes 'Department Name'.

public function getAttributeLabel($attribute)
{
    $labels=$this->attributeLabels();
    if(isset($labels[$attribute]))
        return $labels[$attribute];
    else
        return $this->generateAttributeLabel($attribute);
}

Returns the text label for the specified attribute.

public function getAttributes($names=null)
{
    $values=array();
    foreach($this->attributeNames() as $name)
        $values[$name]=$this->$name;

    if(is_array($names))
    {
        $values2=array();
        foreach($names as $name)
            $values2[$name]=isset($values[$name]) ? $values[$name] : null;
        return $values2;
    }
    else
        return $values;
}

Returns all attribute values.

public function getError($attribute)
{
    return isset($this->_errors[$attribute]) ? reset($this->_errors[$attribute]) : null;
}

Returns the first error of the specified attribute.

public function getErrors($attribute=null)
{
    if($attribute===null)
        return $this->_errors;
    else
        return isset($this->_errors[$attribute]) ? $this->_errors[$attribute] : array();
}

Returns the errors for all attribute or a single attribute.

public function getIterator()
{
    $attributes=$this->getAttributes();
    return new CMapIterator($attributes);
}

Returns an iterator for traversing the attributes in the model. This method is required by the interface IteratorAggregate.

public function getSafeAttributeNames()
{
    $attributes=array();
    $unsafe=array();
    foreach($this->getValidators() as $validator)
    {
        if(!$validator->safe)
        {
            foreach($validator->attributes as $name)
                $unsafe[]=$name;
        }
        else
        {
            foreach($validator->attributes as $name)
                $attributes[$name]=true;
        }
    }

    foreach($unsafe as $name)
        unset($attributes[$name]);
    return array_keys($attributes);
}

Returns the attribute names that are safe to be massively assigned. A safe attribute is one that is associated with a validation rule in the current scenario.

public function getScenario()
{
    return $this->_scenario;
}

Returns the scenario that this model is used in.

Scenario affects how validation is performed and which attributes can be massively assigned.

A validation rule will be performed when calling validate() if its 'on' option is not set or contains the current scenario value.

And an attribute can be massively assigned if it is associated with a validation rule for the current scenario. Note that an exception is the unsafe validator which marks the associated attributes as unsafe and not allowed to be massively assigned.

public function getValidatorList()
{
    if($this->_validators===null)
        $this->_validators=$this->createValidators();
    return $this->_validators;
}

Returns all the validators declared in the model. This method differs from getValidators in that the latter would only return the validators applicable to the current scenario. Also, since this method return a CList object, you may manipulate it by inserting or removing validators (useful in behaviors). For example, $model->validatorList->add($newValidator). The change made to the CList object will persist and reflect in the result of the next call of getValidators.

public function getValidators($attribute=null)
{
    if($this->_validators===null)
        $this->_validators=$this->createValidators();

    $validators=array();
    $scenario=$this->getScenario();
    foreach($this->_validators as $validator)
    {
        if($validator->applyTo($scenario))
        {
            if($attribute===null || in_array($attribute,$validator->attributes,true))
                $validators[]=$validator;
        }
    }
    return $validators;
}

Returns the validators applicable to the current scenario.

public function hasErrors($attribute=null)
{
    if($attribute===null)
        return $this->_errors!==array();
    else
        return isset($this->_errors[$attribute]);
}

Returns a value indicating whether there is any validation error.

public function isAttributeRequired($attribute)
{
    foreach($this->getValidators($attribute) as $validator)
    {
        if($validator instanceof CRequiredValidator)
            return true;
    }
    return false;
}

Returns a value indicating whether the attribute is required. This is determined by checking if the attribute is associated with a CRequiredValidator validation rule in the current scenario.

public function isAttributeSafe($attribute)
{
    $attributes=$this->getSafeAttributeNames();
    return in_array($attribute,$attributes);
}

Returns a value indicating whether the attribute is safe for massive assignments.

public function offsetExists($offset)
{
    return property_exists($this,$offset);
}

Returns whether there is an element at the specified offset. This method is required by the interface ArrayAccess.

public function offsetGet($offset)
{
    return $this->$offset;
}

Returns the element at the specified offset. This method is required by the interface ArrayAccess.

public function offsetSet($offset,$item)
{
    $this->$offset=$item;
}

Sets the element at the specified offset. This method is required by the interface ArrayAccess.

public function offsetUnset($offset)
{
    unset($this->$offset);
}

Unsets the element at the specified offset. This method is required by the interface ArrayAccess.

public function onAfterConstruct($event)
{
    $this->raiseEvent('onAfterConstruct',$event);
}

This event is raised after the model instance is created by new operator.

public function onAfterValidate($event)
{
    $this->raiseEvent('onAfterValidate',$event);
}

This event is raised after the validation is performed.

public function onBeforeValidate($event)
{
    $this->raiseEvent('onBeforeValidate',$event);
}

This event is raised before the validation is performed.

public function onUnsafeAttribute($name,$value)
{
    if(YII_DEBUG)
        Yii::log(Yii::t('yii','Failed to set unsafe attribute "{attribute}" of "{class}".',array('{attribute}'=>$name, '{class}'=>get_class($this))),CLogger::LEVEL_WARNING);
}

This method is invoked when an unsafe attribute is being massively assigned. The default implementation will log a warning message if YII_DEBUG is on. It does nothing otherwise.

public function rules()
{
    return array();
}

Returns the validation rules for attributes.

This method should be overridden to declare validation rules. Each rule is an array with the following structure:

array('attribute list', 'validator name', 'on'=>'scenario name', ...validation parameters...)

• attribute list: specifies the attributes (separated by commas) to be validated;
• validator name: specifies the validator to be used. It can be the name of a model class method, the name of a built-in validator, or a validator class (or its path alias). A validation method must have the following signature:

  // $params refers to validation parameters given in the rule
  function validatorName($attribute,$params)
  

  A built-in validator refers to one of the validators declared in CValidator::builtInValidators. And a validator class is a class extending CValidator.
• on: this specifies the scenarios when the validation rule should be performed. Separate different scenarios with commas. If this option is not set, the rule will be applied in any scenario. Please see scenario for more details about this option.
• additional parameters are used to initialize the corresponding validator properties. Please refer to individal validator class API for possible properties.

array(
    array('username', 'required'),
    array('username', 'length', 'min'=>3, 'max'=>12),
    array('password', 'compare', 'compareAttribute'=>'password2', 'on'=>'register'),
    array('password', 'authenticate', 'on'=>'login'),
);

public function setAttributes($values,$safeOnly=true)
{
    if(!is_array($values))
        return;
    $attributes=array_flip($safeOnly ? $this->getSafeAttributeNames() : $this->attributeNames());
    foreach($values as $name=>$value)
    {
        if(isset($attributes[$name]))
            $this->$name=$value;
        else if($safeOnly)
            $this->onUnsafeAttribute($name,$value);
    }
}

Sets the attribute values in a massive way.

public function setScenario($value)
{
    $this->_scenario=$value;
}

Sets the scenario for the model.

public function unsetAttributes($names=null)
{
    if($names===null)
        $names=$this->attributeNames();
    foreach($names as $name)
        $this->$name=null;
}

Sets the attributes to be null.

public function validate($attributes=null, $clearErrors=true)
{
    if($clearErrors)
        $this->clearErrors();
    if($this->beforeValidate())
    {
        foreach($this->getValidators() as $validator)
            $validator->validate($this,$attributes);
        $this->afterValidate();
        return !$this->hasErrors();
    }
    else
        return false;
}

Performs the validation.

This method executes the validation rules as declared in rules. Only the rules applicable to the current scenario will be executed. A rule is considered applicable to a scenario if its 'on' option is not set or contains the scenario.

Errors found during the validation can be retrieved via getErrors.