1 安装vmware 再续

回车后出现：

Configuring a NAT network for vmnet8.
Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]
Probing for an unused private subnet (this can take some time)...
Either your host is not connected to an IP network, or its network
configuration does not specify a default IP route. Consequently, the subnet
172.16.40.0/255.255.255.0 appears to be unused.
This system appears to have a DHCP server configured for normal use. Beware
that you should teach it how not to interfere with VMware Workstation's DHCP
server. There are two ways to do this:
1) Modify the file /etc/dhcpd.conf to add something like:
subnet 172.16.40.0 netmask 255.255.255.0 {
# Note: No range is given, vmnet-dhcpd will deal with this subnet.
}
2) Start your DHCP server with an explicit list of network interfaces to deal
with (leaving out vmnet8). e.g.:
dhcpd eth0
Consult the dhcpd(8) and dhcpd.conf(5) manual pages for details.
Hit enter to continue.

按一下回车键并出现：

Do you wish to configure another NAT network? (yes/no) [no]

回车后出现：

Do you want to be able to use host-only networking in your virtual machines?
[yes]

回车后出现：

Configuring a host-only network for vmnet1.

Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]

回车后出现：

Consult the dhcpd(8) and dhcpd.conf(5) manual pages for details.
Hit enter to continue.

回车，系统在进行相关配置后出现：

Do you wish to configure another host-only network? (yes/no) [no]

回车后出现：

Extracting the sources of the vmnet module.
Building the vmnet module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmnet-only'
make -C /lib/modules/2.6.18-1.2798.fc6/build/include/.. SUBDIRS=$PWD
SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
CC [M] /tmp/vmware-config0/vmnet-only/driver.o
CC [M] /tmp/vmware-config0/vmnet-only/hub.o
CC [M] /tmp/vmware-config0/vmnet-only/userif.o
CC [M] /tmp/vmware-config0/vmnet-only/netif.o
CC [M] /tmp/vmware-config0/vmnet-only/bridge.o
CC [M] /tmp/vmware-config0/vmnet-only/procfs.o
CC [M] /tmp/vmware-config0/vmnet-only/smac_compat.o
SHIPPED /tmp/vmware-config0/vmnet-only/smac_linux.x386.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST
WARNING: could not open /tmp/vmware-config0/vmnet-only/includeCheck.h:
Invalid argument
CC /tmp/vmware-config0/vmnet-only/vmnet.mod.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory `/tmp/vmware-config0/vmnet-only'
The module loads perfectly in the running kernel.
Starting VMware services:
Virtual machine monitor [确定]
Virtual ethernet [确定]
Bridged networking on /dev/vmnet0 [确定]
Host-only networking on /dev/vmnet1 (background) [确定]
Host-only networking on /dev/vmnet8 (background) [确定]
NAT service on /dev/vmnet8 [确定]
The configuration of VMware Workstation 5.5.3 build-34685 for Linux for this
running kernel completed successfully.
You can now run VMware Workstation by invoking the following command:
"/usr/bin/vmware".
Enjoy,
--the VMware team

到此VMware虚拟机安装完毕，自动返回到终端提示符状态下，输入exit退出终端。现在你可以在菜单中的系统工具中找到VmwareWorkstation 图标，单击一下就可以运行了，第一次运行会出现下图：
　

感谢原创作者.书名：大学生攻克Linux系统教程(又名天下没有难学的Linux)